Pan Head Screws

These screws, which are made in accordance with Japanese Industrial Standards, are shorter and thinner than typical Phillips pan head screws. They are zinc-plated to prevent corrosion in damp conditions. 

You can tighten the screw without causing damage to the recess since these screws include a Torx drive, which has more points of contact than other drives.

You can tighten the screw with flat or phillips screw driver.

The tall, domed head of these screws gives them a polished look.

These pan head screws are lightweight, nonconductive, and resistant to chemicals and oils because they are made of nylon. They may swell if exposed to moisture. 

PEEK screws can tolerate acids, bases, and salt solutions and are dependable in extreme conditions up to 500° F. They are all lightweight, nonconductive, and resistant to chemicals and oils. 

These pan head screws are resistant to breaking in high-impact situations since they are made of polycarbonate. They are lightweight, nonconductive, and resistant to chemicals and oils. 

These pan head screws, which are made of brass, are electrically conductive, nonmagnetic, and resistant to corrosion in damp conditions. 

These titanium screws are the most corrosion-resistant pan head screws we have; they can tolerate chemicals, acids, and salt water. Their strength-to-weight ratio is high. 

These screws, which are made in accordance with Japanese Industrial Standards, are shorter and thinner than typical Phillips pan head screws. They can be slightly magnetic and are resistant to chemicals. 

Wide-head screws do not require a washer and distribute clamping power uniformly. They are a suitable choice for securing thin material or when the screw hole is significantly larger than the screw's diameter, even though they might not fit into tight spaces. 

No countersink is needed when using these metric pan head screws for a polished, low-profile appearance. Their heads are chamfered or slightly domed, so they won't cling to straps or garments as you go by. 

These nylon screws are lightweight, nonconductive, and resistant to chemicals and oils. They may swell if exposed to moisture. 

These pan head screws, which are made of brass, are electrically conductive, nonmagnetic, and resistant to corrosion in damp conditions. 

A nylon patch that is attached to the threads of these screws creates friction and keeps them from loosening due to vibration.

To withstand significant vibration, these screws feature a washer with strong interior teeth that pierce surfaces. The washer's polished exterior edge gives it a polished appearance. The washer, also referred to as Sems screws, is permanently fastened but rotates freely.

To increase holding power and vibration resistance, these screws have a washer with strong exterior teeth that pierce surfaces. The washer, also referred to as Sems screws, is permanently fastened but rotates freely.

The split lock washer adds strain and keeps it from loosening from slight vibrations by flattening when compressed. Sems Screw.

While the split lock washer increases strain to stop loosening from slight vibrations, the flat washer distributes holding pressure and shields delicate surfaces from harm. Sems Screw.